Technical FAQs

The Bluetooth® connection between your device and the LX takes just a few steps:

- Activate Bluetooth® mode on your phone or tablet
- Switch on the LX by turning the volume knob
- On the control panel, press Bluetooth, then briefly press "Pair"
- Search for the LX on your device, then pair them up.

Now you can play music from your phone or tablet.

Thanks to technology Widesound 3.0® patented by La Boite concept which allows for immersive sound diffusion, the LX speaker delivers the same sound fidelity, regardless of its position in your room, and can therefore be installed wherever you want.

The maximum range of a Bluetooth speaker is 10 meters. If this distance is exceeded, the sound jerks and eventually cuts out.

This distance may vary depending on the environment in which you use these devices. For example, there may be sources of wireless interference (such as microwave ovens) or physical obstacles (such as walls or human bodies) that affect the effective range of your Bluetooth. If such factors affect Bluetooth functionality, bring the two devices closer together and try again.

Here is a list of potential interference materials:
- wood, glass and many synthetic materials: low interference
- water, bricks, marble: medium interference
- plaster, concrete, shielded glass: high interference
- metal: very high interference

Changing your belt is a quick procedure that may require several tries:

- First, remove the previous belt
- Place your new belt on top of your turntable, making sure that the axis of the turntable is inside the circle of the belt
- Using your left index finger, pass the belt through the notch in the pulley, then hold the position until the belt is in place.
- With your right hand, place the belt on the edge of the turntable, then, while holding it, turn the platter until it makes a complete turn.

Your belt is now in place.

The LX turntable arm is fitted with an Ortofon OM10 stylus. The pickup consists of two parts: the cartridge, screwed onto the arm, and the stylus, mounted on the cartridge. To replace it, pull gently on the stylus to detach it from the cartridge, then insert the new stylus in its place.

To connect the LX turntable to the speaker, you'll find an RCA cable and a power supply in your product packaging. Start by connecting these two cables to the LX ports. Then, with the help of another person to carry the turntable, connect the other ends to the dedicated ports on the underside of the turntable. Finally, pre-amplify your turntable by pushing the knob above the RCA ports to the right, in "PHONO" mode. It's important to also connect the metal fork on both sides to ground the turntable. This will prevent background noise when listening.

For the LX Turntable, 4 springs are required. For the "standard" LX model (without integrated turntable) we supply 5 shock absorbers, the 5th is only required for heavier turntables.

We do not supply springs for the LX X Turntable.

The Bluetooth® connection between your device and the PR LINK is done in just a few steps:

- Activate Bluetooth® mode on your phone or tablet
- Turn on the PR LINK by pressing the push button for a few seconds.
- Select the Bluetooth® source by short presses on the push button.
- Press the hatch at the back of your PR LINK to lift it up, then remove it.
- Press the "BT PAIR" button once on the top of the speaker, next to the different sources. The Bluetooth® indicator will then flash.
- Look for it PR LINK on your device and then pair them.
- Place the hatch back on top of the enclosure.

Now you can play music from your phone or tablet.

THE PR LINK has a vent on the back, commonly called "Bass Reflex" which draws air in to reinforce the volume of the speaker's low frequencies. When your speaker is stuck too close to a wall or enclosed, the sound can seem muffled. We advise you to place your speaker at a minimum distance of 15 centimeters from the wall and to avoid placing it in a space that is too small (for example, a closed bookcase). Ideally, the speaker PR LINK can be placed on its stand so that it is positioned at the optimal listening height. You will find it in the "Accessories" section of the site.

The Bluetooth range of a speaker PR Link is 20 meters maximum. If this distance is exceeded, the sound stutters and eventually cuts out.

This distance may vary depending on the environment in which you use these devices. For example, there may be sources of wireless interference (such as microwave ovens) or physical obstacles (such as walls or human bodies) that affect the effective range of your Bluetooth. If such factors affect Bluetooth functionality, bring the two devices closer together and try again.

Here is a list of potential interference materials:
- wood, glass and many synthetic materials: low interference
- water, bricks, marble: medium interference
- plaster, concrete, shielded glass: high interference
- metal: very high interference

The Bluetooth® connection between your device and the Cube takes just a few steps:

- Activate Bluetooth® mode on your phone or tablet.
- Turn on the Cube
- On the control panel, press Bluetooth® and then "Pair" once (1 short press). The Bluetooth® indicator will then flash.
- Look for it Cube on your device and then pair them.

Now you can play music from your phone or tablet.

Thanks to La Boite concept 's patented Widesound 2.0® technology for immersive sound diffusion, the Cube loudspeaker delivers the same fidelity of sound, whatever its position in your room, so it can be installed wherever you like.

Yes, an RCA input is located under the Cube , allowing you to connect your turntable while concealing the connections under the speaker. If your turntable is not pre-amplified, you'll need a pre-amplifier.

The maximum range of a Bluetooth speaker is 10 meters. If this distance is exceeded, the sound jerks and eventually cuts out.

This distance may vary depending on the environment in which you use these devices. For example, there may be sources of wireless interference (such as microwave ovens) or physical obstacles (such as walls or human bodies) that affect the effective range of your Bluetooth. If such factors affect Bluetooth functionality, bring the two devices closer together and try again.

Here is a list of potential interference materials:
- wood, glass and many synthetic materials: low interference
- water, bricks, marble: medium interference
- plaster, concrete, shielded glass: high interference
- metal: very high interference

Use the RCA cable supplied with the turntable: connect the RCA output of the turntable to the RCA input of your loudspeaker. You can also use an RCA / Auxiliary cable: in this case, connect the RCA end of the cable to the turntable's RCA output, and the Auxiliary end to your speaker's Auxiliary input. The Square turntable has two modes: pre-amplified or non-pre-amplified, so it can be adapted to any audio system. If you have a system with amplifier and pre-amplifier, please press the "Phono" tab towards the turntable to activate the non-pre-amplified mode. Conversely, if you don't have a pre-amplifier, pull the pin towards the back of the turntable to activate pre-amplified mode.

The arm of the Square turntable is fitted with an Ortofon OM10 diamond. The pickup consists of two parts: the cartridge, screwed onto the arm, and the stylus, mounted on the cartridge. The stylus is simply pushed onto the cell. To replace it, pull gently on the stylus to detach it from the cell, then insert the new stylus in its place.

The Escape streamer is a wireless audio streamer that turns your speakers into a wireless multi-room sound system by connecting to your home Wi-Fi network. In other words, it means you can play synchronized music in multiple rooms of your home. For example, if you have four speakers in your home, with an easy setup, you can then enjoy your music anywhere on your four speakers simultaneously.

If you install the Escape streamer on the PR LINK , use the USB-C / Escape streamer adapter supplied with the speaker and follow the instructions. If you install the Escape streamer on another speaker La Boite concept ( Cube , LX, LXX, PR/01...) or another brand speaker, please follow the guide below.

For all speakers with an Auxiliary, RCA or Toslink input. The Escape streamer has a Jack 3.5 / Toslink output, and is supplied with several adapters for connecting it to your audio system: 1 x Auxiliary cable, 1 x Toslink cable, 1 x Auxiliary / RCA cable.

The Escape streamer is compatible with AirPlay2® and GoogleCast® streaming systems.

The Escape streamer uses Wi-Fi broadcasting: the range therefore depends on the location of your box and its speed.

Compatible platforms include Spotify Connect®, Apple Music®, Tidal®, RoonReady®, YouTube Music®.

Yes, the Escape streamer is compatible with 2.4G and 5.0G Wi-Fi routers.

Follow the instructions in these two animations for use via iOS(FR - ENG) or Android(FR - ENG).